.svg)
JOTON® BEST COAT 2IN1
Surface material:
Plaster, concrete, cement
Typical applications:
Applied in factory
Introduction:
High-grade putty JOTON® BEST COAT 2IN1 used for interior and exterior in order to flatten, smooth interior and exterior wall surface before applying paint. It helps to increases life of paint layer, suitable for applying on plaster, concrete, cement.
Outstanding feature
Description
High-grade putty JOTON® BEST COAT 2IN1 used for interior and exterior in order to flatten, smooth interior and exterior wall surface before applying paint. It help to increases life of paint layer, suitable for applying on plaster, concrete, cement.
Durable with weather, high adhesion, easy to apply, smooth surface, fill cracks on surface.
High-grade putty JOTON® BEST COAT 2IN1 is produced follow TCVN 7239:2014 standard and National Technical Regulations QCVN 16:2014/BXD on products, goods of building material.
Features
  |
- START Minimum 110 minutes. - FINISH Maximum 420 minutes. |
Do not stack over each other over 10 packs. Store in dry and cool place.
.png)
- Color: White.
- Smoothness: Maximum 2%.
- Water retaining: Minimum 99%.
- Surface hardness ( after 7 days): Min. 0.14 N/cm2.
On the tested sample surface.
 |
BASE ADHESION - At standard condition. Minimum 0.47 / MPa. |
  |
BASE ADHESION - After dip in water 72h then use thermal shock. Minimum 0.32 / MPa. |
** Actual adhesion degree can change depends on environment and surface condition.
** Apply on well prepared wall.
how to apply
More
Note
 |
Stir well before use |
 |
Dry time depends on temperature and humidity, ventilation degree of environment. |
Health and safety
- Keep away from children- Ensure ventilate condition during apply and dry time.
- Avoid to inhale putty powder.
- Should use protective glass when apply and re-sand. When powder gets into eyes, wash with water and visit medical facilities immediately.
- Use water and soap to clean powder.
- Do not pour out putty powder to sewer and fountain.
.png)
.png)
.png)
